diff --git a/src/main.cpp b/src/main.cpp
index 635dcf3..e4dd5f2 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -1,41 +1,51 @@
+/*
+This is to route the serial logs from a device to serial bluetooth for convenient monitoring.
+Doit DevKitV1 - Connect Serial port 2 (GPIO17/GPIO16) to the device you want to monitor.
+On the phone, connect to the ESP32_Logger and use the "Serial Bluetooth Terminal" app to show the logs.
+*/
+
 #include <Arduino.h>
-
-/*Program to control LED (ON/OFF) from ESP32 using Serial Bluetooth
- * Thanks to Neil Kolbans for his efoorts in adding the support to Arduino IDE
- * Turotial on: www.circuitdigest.com&nbsp;
- */
-
 #include "BluetoothSerial.h" //Header File for Serial Bluetooth, will be added by default into Arduino
 BluetoothSerial ESP_BT; //Object for Bluetooth
 
-int incoming;
+bool isLogging;
 
 void setup() {
   Serial.begin(9600); //Start Serial monitor in 9600
-  ESP_BT.begin("ESP32_LED_Control"); //Name of your Bluetooth Signal
+  ESP_BT.begin("ESP32_Logger"); //Name of your Bluetooth Signal
   Serial.println("Bluetooth Device is Ready to Pair");
   pinMode (LED_BUILTIN, OUTPUT);//Specify that LED pin is output
-}
 
+  Serial2.begin(9600); // points to Serial port 2 (GPIO17 / GPIO16)
+
+  isLogging=false;
+}
 
 void loop() {
   if (ESP_BT.available()) { //Check if we receive anything from Bluetooth
-    incoming = ESP_BT.read(); //Read what we recevive 
+    int incoming = ESP_BT.read(); //Read what we recevive 
     Serial.print("Received:"); Serial.println(incoming);
     if (incoming == 49) {
         digitalWrite(LED_BUILTIN, HIGH);
-        ESP_BT.println("LED turned ON");
+        isLogging=true;
+        ESP_BT.println("Logging turned ON");
     }
 
     if (incoming == 48) {
         digitalWrite(LED_BUILTIN, LOW);
-        ESP_BT.println("LED turned OFF");
+        isLogging=false;
+        ESP_BT.println("Logging turned OFF");
     }     
 
     if (incoming == 57) {
-        ESP_BT.println("[APP] Free memory: " + String(esp_get_free_heap_size()) + " bytes");
+        ESP_BT.println("Free memory: " + String(esp_get_free_heap_size()) + " bytes");
     }     
+      
+    if(Serial2.available() && isLogging){
+      String incomingData = Serial2.readStringUntil('\n');
+      ESP_BT.println(incomingData);
+    }
   }
 
-  delay(1000);
+  delay(100);
 }
\ No newline at end of file