PlatformIO_BlindRollerControl/src/main.cpp

/*
Source:
https://randomnerdtutorials.com/esp32-over-the-air-ota-programming/

To update the firmware with Platform IO, do a build and then upload in the web
interface the file .pio/build/esp32doit-devkit-v1/firmware.bin

 */

#include <Arduino.h>
/*
 * Rui Santos
 * Complete Project Details http://randomnerdtutorials.com
 */

#include <ESPmDNS.h>
#include <Update.h>
#include <WebServer.h>
#include <WiFi.h>
#include <WiFiClient.h>

const char* host = "esp32blind";
const char* ssid = "JoNelsDarlings";
const char* password = "Paris2016";

// variabls to blink without delay:
const int led = 2;
unsigned long previousMillis = 0;  // will store last time LED was updated
const long interval = 1000;        // interval at which to blink (milliseconds)
int ledState = LOW;                // ledState used to set the LED

// Motor Control PWM parameters
int motor1Pin1 = 27;
int motor1Pin2 = 26;
int enable1Pin = 14;

// Setting PWM properties
const int freq = 30000;
const int pwmChannel = 0;
const int resolution = 8;
int dutyCycle = 200;

WebServer server(80);

/*
 * Login page
 */

const char* loginIndex =
    "<form name='loginForm'>"
    "<table width='20%' bgcolor='A09F9F' align='center'>"
    "<tr>"
    "<td colspan=2>"
    "<center><font size=4><b>ESP32 Login Page</b></font></center>"
    "<br>"
    "</td>"
    "<br>"
    "<br>"
    "</tr>"
    "<td>Username:</td>"
    "<td><input type='text' size=25 name='userid'><br></td>"
    "</tr>"
    "<br>"
    "<br>"
    "<tr>"
    "<td>Password:</td>"
    "<td><input type='Password' size=25 name='pwd'><br></td>"
    "<br>"
    "<br>"
    "</tr>"
    "<tr>"
    "<td><input type='submit' onclick='check(this.form)' value='Login'></td>"
    "</tr>"
    "</table>"
    "</form>"
    "<script>"
    "function check(form)"
    "{"
    "if(form.userid.value=='admin' && form.pwd.value=='admin')"
    "{"
    "window.open('/serverIndex')"
    "}"
    "else"
    "{"
    " alert('Error Password or Username')/*displays error message*/"
    "}"
    "}"
    "</script>";

/*
 * Server Index Page
 */

const char* serverIndex =
    "<script "
    "src='https://ajax.googleapis.com/ajax/libs/jquery/3.2.1/jquery.min.js'></"
    "script>"
    "<form method='POST' action='#' enctype='multipart/form-data' "
    "id='upload_form'>"
    "<input type='file' name='update'>"
    "<input type='submit' value='Update'>"
    "</form>"
    "<div id='prg'>progress: 0%</div>"
    "<script>"
    "$('form').submit(function(e){"
    "e.preventDefault();"
    "var form = $('#upload_form')[0];"
    "var data = new FormData(form);"
    " $.ajax({"
    "url: '/update',"
    "type: 'POST',"
    "data: data,"
    "contentType: false,"
    "processData:false,"
    "xhr: function() {"
    "var xhr = new window.XMLHttpRequest();"
    "xhr.upload.addEventListener('progress', function(evt) {"
    "if (evt.lengthComputable) {"
    "var per = evt.loaded / evt.total;"
    "$('#prg').html('progress: ' + Math.round(per*100) + '%');"
    "}"
    "}, false);"
    "return xhr;"
    "},"
    "success:function(d, s) {"
    "console.log('success!')"
    "},"
    "error: function (a, b, c) {"
    "}"
    "});"
    "});"
    "</script>";

const char* movePage =
    "<h1><a href='/rev'>REV</a></h1> <h1><a href='/fwd'>FWD</a></h1>";

/*
 * setup function
 */
void setup(void) {
  pinMode(led, OUTPUT);

  // sets the pins as outputs:
  pinMode(motor1Pin1, OUTPUT);
  pinMode(motor1Pin2, OUTPUT);
  pinMode(enable1Pin, OUTPUT);

  // configure LED PWM functionalitites
  ledcSetup(pwmChannel, freq, resolution);

  // attach the channel to the GPIO to be controlled
  ledcAttachPin(enable1Pin, pwmChannel);

  ledcWrite(pwmChannel, 255);

  Serial.begin(9600);

  // Connect to WiFi network
  WiFi.begin(ssid, password);
  Serial.println("");

  // Wait for connection or reboot if it doesn't connect for too long
  uint32_t wifiConnAttements = 0;
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
    if (wifiConnAttements++ > 120) {
      Serial.println(
          "<Wifi not connecting after 120 attmepts (1 min.)  - rebooting>");
      ESP.restart();
    }
  }

  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  /*use mdns for host name resolution*/
  if (!MDNS.begin(host)) {  // http://esp32ota.local
    Serial.println("Error setting up MDNS responder!");
    while (1) {
      delay(1000);
    }
  }
  Serial.println("mDNS responder started");
  /*return index page which is stored in serverIndex */
  server.on("/", HTTP_GET, []() {
    server.sendHeader("Connection", "close");
    server.send(200, "text/html", loginIndex);
  });
  server.on("/serverIndex", HTTP_GET, []() {
    server.sendHeader("Connection", "close");
    server.send(200, "text/html", serverIndex);
  });
  server.on("/mot", HTTP_GET, []() {
    server.sendHeader("Connection", "close");
    Serial.println("Motor Access");
    server.send(200, "text/html", movePage);
  });
  server.on("/fwd", HTTP_GET, []() {
    server.sendHeader("Connection", "close");
    // Move the DC motor forward at maximum speed
    Serial.println("Moving Forward");
    digitalWrite(motor1Pin1, LOW);
    digitalWrite(motor1Pin2, HIGH);
    delay(3000);
    // Stop the DC motor
    digitalWrite(motor1Pin2, LOW);

    server.send(200, "text/html", movePage);
  });
  server.on("/rev", HTTP_GET, []() {
    server.sendHeader("Connection", "close");
    Serial.println("Moving Backward");
    digitalWrite(motor1Pin1, HIGH);
    digitalWrite(motor1Pin2, LOW);
    delay(3000);
    // Stop the DC motor
    digitalWrite(motor1Pin1, LOW);

    server.send(200, "text/html", movePage);
  });
  /*handling uploading firmware file */
  server.on(
      "/update", HTTP_POST,
      []() {
        server.sendHeader("Connection", "close");
        server.send(200, "text/plain", (Update.hasError()) ? "FAIL" : "OK");
        ESP.restart();
      },
      []() {
        HTTPUpload& upload = server.upload();
        if (upload.status == UPLOAD_FILE_START) {
          Serial.printf("Update: %s\n", upload.filename.c_str());
          if (!Update.begin(
                  UPDATE_SIZE_UNKNOWN)) {  // start with max available size
            Update.printError(Serial);
          }
        } else if (upload.status == UPLOAD_FILE_WRITE) {
          /* flashing firmware to ESP*/
          if (Update.write(upload.buf, upload.currentSize) !=
              upload.currentSize) {
            Update.printError(Serial);
          }
        } else if (upload.status == UPLOAD_FILE_END) {
          if (Update.end(
                  true)) {  // true to set the size to the current progress
            Serial.printf("Update Success: %u\nRebooting...\n",
                          upload.totalSize);
          } else {
            Update.printError(Serial);
          }
        }
      });
  server.begin();
}

void loop(void) {
  server.handleClient();
  delay(1);
  /*
      // Move the DC motor forward at maximum speed
      Serial.println("Moving Forward");
      digitalWrite(motor1Pin1, LOW);
      digitalWrite(motor1Pin2, HIGH);
      delay(2000);

      // Stop the DC motor
      Serial.println("Motor stopped");
      digitalWrite(motor1Pin1, LOW);
      digitalWrite(motor1Pin2, LOW);
      delay(1000);

      // Move DC motor backwards at maximum speed
      Serial.println("Moving Backwards");
      digitalWrite(motor1Pin1, HIGH);
      digitalWrite(motor1Pin2, LOW);
      delay(2000);

      // Stop the DC motor
      Serial.println("Motor stopped");
      digitalWrite(motor1Pin1, LOW);
      digitalWrite(motor1Pin2, LOW);
      delay(1000);
  */
}